Fable: The Lost Chapters Mod Scene
Fast Uncompromising Discussions. FUDforum will get your users talking.
Home » Site » General Discussion » Fable Papercraft
Fable Papercraft [message #43944] Tue, 15 July 2008 14:35 Go to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
Hey all. It's been nearly a year since I first posted on this forum and this is my second post Embarassed

I guess this is the best place to put this - didn't know if it really fitted under the graphics editting section Smile

Anyway - I've recently re-started modding fable and playing around with level editting and adding custom "architecture" (do steps count Razz).

Also recently started using a bit of software called pepakura for converting 3d models into papercraft, and being the creative individual I am (open for dispute), I decided to try making some fable papercraft.

So here are a couple of models I've made. I'll post more if people want me to.
JOB mask
(fits roughly...Removable too Very Happy - nose is a bit fiddly but not that bad)
http://img148.imageshack.us/img148/7062/jackofbladesmaskmodel01it1.th.pnghttp://img253.imageshack.us/img253/318/jackofbladesmaskmodel02pk6.th.png

Chocolate Box
http://img212.imageshack.us/img212/879/chocolateboxmodeltg8.th.png

Openable Chest
(Yet to try making this one - is reasonably complicated but should be reasonably straightforward to make. It should open too...)
http://img391.imageshack.us/img391/8471/chestmodelbm1.th.png

I don't have any instructions cos they should all be pretty simple to make. All you need really is a printer, a craft knife or something similar, something to cut on to (thick card will do) and glue.

I need ideas + sugestions for more models. Simple models would be good Smile Character requests will probably be politely ignored just cos:
1)They take ages to make to any high quality
2)No one would ever finish making one Razz
3)The save function is locked until you bt the license for pepakura (so you can make and copy your designs as bmps but then you can't re-open and edit them if that makes sense)

Buildings maybe?

Feel free to post pictures of completed models you've made here. Or any designs you do.

Vahron

Report message to a moderator

Re: Fable Papercraft [message #43945 is a reply to message #43944] Tue, 15 July 2008 15:03 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
Sword of aoens and avo's tear ofcourse Very Happy

Also Skorm's Bow if that's posible.

Great work, thanks ^^

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

Report message to a moderator

Re: Fable Papercraft [message #43946 is a reply to message #43945] Tue, 15 July 2008 18:20 Go to previous messageGo to next message
Marcopolo is currently offline  Marcopolo
Messages: 1292
Registered: January 2006
Location: north vancouver
nice job dude

its good to see someone doing something new/different around here for a change

There once was a member of this land,
a humorous posting he planned,
but when he posted,
by mods he was toasted,
and now he has found himself banned.

Report message to a moderator

Re: Fable Papercraft [message #43957 is a reply to message #43946] Wed, 16 July 2008 05:59 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
Thanks Smile

2 more for yer:

Apple Pie:
http://img246.imageshack.us/img246/2464/applepiemodelbw3.th.png

Apple:
http://img515.imageshack.us/img515/9898/applemodelns0.th.png


I tried the sword of aeons - i may give it another go but I think I'll have to simplify the model first Confused Skorms bow might be possible - I'll give it a go when I have time...

I might upload one of the guild map later. Anyone feel like helping me make a complete paper guild...

And for anyone who can't use an image editor Very Happy
http://img296.imageshack.us/img296/1699/qcwy1.th.png
(had to stretch it a little so it appeared more like the quest cards in game)

keep the sugestions coming Smile

Vahron

Report message to a moderator

Re: Fable Papercraft [message #43959 is a reply to message #43957] Wed, 16 July 2008 07:05 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
Could you make the quest table from the guild to? you know the one in the entrence?

would be realy cool ^^

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

Report message to a moderator

Re: Fable Papercraft [message #43967 is a reply to message #43944] Wed, 16 July 2008 14:21 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
haha Smile

I actually beat you to it but didn't post it up Razz

Guild Map Table
http://img255.imageshack.us/img255/6641/worldmaptablemodelhi8.th.png

It's a bit trickierto do I think cos of the small pieces. I haven't tried it yet but I will at somepoint.

If anyone completes a model please post it here so everyone can see how it turns out Very Happy

Vahron

Report message to a moderator

Re: Fable Papercraft [message #43968 is a reply to message #43944] Wed, 16 July 2008 14:51 Go to previous messageGo to next message
The New Fabled Ravrn
Messages: 500
Registered: April 2008
Gonna try characers?

http://img809.imageshack.us/img809/9329/newim.gif http://img19.imageshack.us/img19/4678/rulesq.gif

Report message to a moderator

Re: Fable Papercraft [message #43976 is a reply to message #43967] Wed, 16 July 2008 17:01 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
Great thanks, i'll post my results later Smile (Printer is dead atm)

Next request would be. (this will be a hard one)........................................................ ............................................................ ................................................A wasp!

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

Report message to a moderator

Re: Fable Papercraft [message #44003 is a reply to message #43944] Thu, 17 July 2008 12:15 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
@TNFR
Urmm - I dunno mate - maybe If i have enough time but again:
Quote:

Character requests will probably be politely ignored just cos:
1)They take ages to make to any high quality
2)No one would ever finish making one Razz
3)The save function is locked until you bt the license for pepakura (so you can make and copy your designs as bmps but then you can't re-open and edit them if that makes sense)



I'd have to edit + lower the polygon count of the model quite a bit before hand so it would be suitable. JOB may be good fun to have a go at at some point though but ain't promising sorry:)

@Waspp
Most complicated model I done so far and had to edit the model a little so it wouldn't be stupidly difficult to make all the small parts. I think It will work alright tho Smile

Wasp
http://img363.imageshack.us/img363/7350/waspmodel01vl7.th.pnghttp://img294.imageshack.us/img294/9045/waspmodel02fr4.th.pnghttp://img366.imageshack.us/img366/4992/waspmodel03xw1.th.png

There are a couple of strange small pieces in this one - once you start building it it should be kinda obvious where they go (I hope Razz). The best way to do the wings is to stick the corresponding pieces together then cut round the edge with a knife once dry. The black edge is not the actual edge - pepakura doesn't support transparency so just cut round the wing bit.

It won't stand up on it's own so maybe use some string or something to hang it?

Any other ideas anyone else? A simple building maybe?

Smile

[Updated on: Thu, 17 July 2008 12:16]

Report message to a moderator

Re: Fable Papercraft [message #44004 is a reply to message #43944] Thu, 17 July 2008 12:21 Go to previous messageGo to next message
The New Fabled Ravrn
Messages: 500
Registered: April 2008
How about a sword? If not, try a beetle.

http://img809.imageshack.us/img809/9329/newim.gif http://img19.imageshack.us/img19/4678/rulesq.gif

Report message to a moderator

Re: Fable Papercraft [message #44005 is a reply to message #44004] Thu, 17 July 2008 12:23 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
Thanks for the wasp Very Happy (my favo model of all times [Based my internet nickname of it Smile {aswell as my 360 Gamertag}))

Will post results later. Thanks a bunch!

[Edit]: A building....hmmm....what about the knothole glade tavern? quite a large model tough. and will the inside be textured to?

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

[Updated on: Thu, 17 July 2008 12:27]

Report message to a moderator

Re: Fable Papercraft [message #44006 is a reply to message #43944] Thu, 17 July 2008 13:21 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
Does the stick count as a sword?

Wooden Stick:
http://img228.imageshack.us/img228/148/stickmodelvc5.th.png

If anyone has the patience to build this it's nearly 30 cm long (apparently)

I'll try a slightly more bladed weapon in a sec...

Which kinda beetle? The ones you fight to start with in the guild woods?

@Waspp
No probs mate Smile

KHG tavern may be good - will have a look at the model. It doesn't actually have an inside I don't think :/

edit: sorry - my bad - it does - just doesn't show up in cbox 3d editor Razz

[Updated on: Thu, 17 July 2008 13:31]

Report message to a moderator

Re: Fable Papercraft [message #44010 is a reply to message #44006] Thu, 17 July 2008 15:40 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
<3 your'e work, thanks so much Very Happy and how will the inside of the tavern work? like glue the inside on the outside?

like this (roof)
____________/-/
__outside --->/-/
__________ /-/ <--- Inside

'' - '' = glue

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

[Updated on: Thu, 17 July 2008 15:43]

Report message to a moderator

Re: Fable Papercraft [message #44011 is a reply to message #44010] Thu, 17 July 2008 15:42 Go to previous messageGo to next message
Modmaster7 is currently offline  Modmaster7
Messages: 1
Registered: April 2007
Hmm nice job

Report message to a moderator

Re: Fable Papercraft [message #44025 is a reply to message #43944] Fri, 18 July 2008 01:31 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
Thanks both Smile

Silver Key
http://img257.imageshack.us/img257/4750/silverkeyzd7.th.png
This model is harder than it looks - it's a good idea to have something like a cocktail stick to press down inside flaps.

@ waspp
Yeah I think it'll probably be glued something like that - You may have to make do with a smaller building first - the KHG tavern looks pretty difficult atm. I may Edit it round a bit and see what I can do though.

But first a sword.

Watch this space Razz

Report message to a moderator

Re: Fable Papercraft [message #44027 is a reply to message #44025] Fri, 18 July 2008 02:26 Go to previous messageGo to next message
morerunes is currently offline  morerunes
Messages: 2154
Registered: June 2007
Location: My desk

Administrator
this is one of the most interesting thing's I've seen here in a while, props to you Smile

unfortunately I'm not very crafty, so I may not actually build any of these.

"All of the work, and none of the play, will surely provide for a speedy decay"

Report message to a moderator

Re: Fable Papercraft [message #44029 is a reply to message #44027] Fri, 18 July 2008 03:46 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
@Morerunes
Cheers Smile

Ok - first proper weapon (I ain't counting the stick Razz )

Steel Katana
http://img175.imageshack.us/img175/1453/steelkatanamodel01xj0.th.pnghttp://img175.imageshack.us/img175/7138/steelkatanamodel02bf4.th.pnghttp://img155.imageshack.us/img155/6220/steelkatanamodel03zx5.th.png

This looks like it will be difficult - don't waste yer printer ink unless you think you can do it Razz

The flaps are a bit strange in places so be prepared to trim them etc. There's one tiny piece which fits on the gold/bronze part which goes over the blade somewhere...

Good luck Smile

Report message to a moderator

Re: Fable Papercraft [message #44032 is a reply to message #44029] Fri, 18 July 2008 04:47 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
Once again thanks! Such ashame my printer is broken :< I'll fix it tough.

A tip: Try useing a symetric weapon insted. i think that would be alot
easyier.

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

Report message to a moderator

Re: Fable Papercraft [message #44035 is a reply to message #44032] Fri, 18 July 2008 05:00 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
And once again no probs Smile

Yeah - you'd think so - but the longsword screwed up a bit when i tried it :/

I'm gunna give the katana a go tho - this may be fun Very Happy

Report message to a moderator

Re: Fable Papercraft [message #44039 is a reply to message #44035] Fri, 18 July 2008 08:19 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
I made the Fable Map Table. It was damn complicated. :S I would rate my outcome 3/10 due to these reasons

*I used silk thin paper wich were hard to work with
*I had no glue so i used scotch tape
*I Didnt have any aper knife so i had to use a sax (scissor)
*I dont have the proper software for my printer (I use drivers for another priner since my installation cd is gone)
*I didnt have any printer inc (no colour inc nor black inc). So i used photo inc (wich i had like one pixel left of in the inc value prewier)

[Edit] Couldnt make the map itself fit the ''base'' so i'm not going to post the outcome Razz i'll make nother try with the wasp anyway

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

[Updated on: Fri, 18 July 2008 09:34]

Report message to a moderator

Re: Fable Papercraft [message #44043 is a reply to message #43944] Fri, 18 July 2008 09:40 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
haha - ah wells mate - well done anyway. I look forward to seeing it Very Happy I actually haven't tried the map table yet so

A knife is kinda essential...

I'll try to post up some pics of finished models over the next couple of days (I won't be round much tomorrow so I expect to come back to a thread full of pics of amazingly built models Razz )

For people who have never tried doing anything like this before probably try jack of blades mask or the chocolate box first just to get used to it Smile

The katana does work but it's kinda difficult :/ I'm getting there tho and it's almost finished. It's looking pretty good so far. You have to cut down most of the tabs so they fit - I think pepakura screwed up when calculating them (or something...)

edit: ah right - nevermind then - I'll give it a go after the katana

The wasp should be good...

[Updated on: Fri, 18 July 2008 09:43]

Report message to a moderator

Re: Fable Papercraft [message #44046 is a reply to message #44043] Fri, 18 July 2008 11:19 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
Sorry to be such a bother, but i see that the wasp's pieces are spred a little all over the 2 pages. do you think you could point out were all the pieces should be?

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

[Updated on: Fri, 18 July 2008 11:21]

Report message to a moderator

Re: Fable Papercraft [message #44060 is a reply to message #44046] Sat, 19 July 2008 02:35 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
don't worry

right - here:
http://img172.imageshack.us/img172/3125/waspmodel01ju5.th.pnghttp://img155.imageshack.us/img155/3594/waspmodel02gx5.th.pnghttp://img230.imageshack.us/img230/6071/waspmodel03po8.th.png

I'm doing this just before I dash out so I think this is right. The small pieces fit on the body somewhere.

won't be around for a day or 2 so have fun Smile

Report message to a moderator

Re: Fable Papercraft [message #44067 is a reply to message #43944] Sat, 19 July 2008 08:30 Go to previous messageGo to next message
The New Fabled Ravrn
Messages: 500
Registered: April 2008
That katana+stick are pretty cool, keep up the good work Smile

http://img809.imageshack.us/img809/9329/newim.gif http://img19.imageshack.us/img19/4678/rulesq.gif

Report message to a moderator

Re: Fable Papercraft [message #44090 is a reply to message #44060] Sun, 20 July 2008 03:25 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
no thats not true, see that piece with a little red on it? that's for the head.
is the tiny green piece that to you think?

And you need thicker paper for the waspp, was hell to just get the head together with tape and thin paper

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

Report message to a moderator

Re: Fable Papercraft [message #44103 is a reply to message #44090] Sun, 20 July 2008 08:47 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
ohh - sorry mate - was in a rush - yeah you are right - that piece does go on the head Embarassed

The tiny green piece I origionaly intended as a flap to place on the end of the body to stick the head to or something along those lines - use it if yer wish but I dunno how well it will work.

Try to get hold of some glue Shocked it is much easier. If possible see if you can get some higher weight paper - 160 gsm is what I use I think - I don't think it's too expensive and it should go in yer printer ok...

I'll try and get one more model up before I go away for a week...

Report message to a moderator

Re: Fable Papercraft [message #44108 is a reply to message #44103] Sun, 20 July 2008 14:28 Go to previous messageGo to next message
Waspp is currently offline  Waspp
Messages: 45
Registered: June 2008
Location: Sweden
Thanks for the advice. It's not that it's to expencive, it's that i'm to lazy to go and buy it Razz [I'm just 15 so i'd need to take the buss and such]

I'm also going away for a week though (vacation to greece ftw ^^)

i'm done with the waspp but it's a little messed up to Razz

http://i267.photobucket.com/albums/ii281/_-Waspp-_/Wasppnews ig2-1.jpg

Report message to a moderator

Re: Fable Papercraft [message #44110 is a reply to message #44108] Sun, 20 July 2008 15:08 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
haha Razz

I'm on holiday for a week too so this thread'll need some bumping when we both get back Razz

I'll post an image of some of the finished models for people if I get a chance tomorrow Smile

[Updated on: Mon, 21 July 2008 05:29]

Report message to a moderator

Re: Fable Papercraft [message #44135 is a reply to message #43944] Mon, 21 July 2008 05:30 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
Sorry about the double post but it is new stuff rather than just an edit.

Promised yer a new model so here y' all go

Blue Mushroom
http://img397.imageshack.us/img397/2744/bluemushroommodeleo9.th.png

Report message to a moderator

Re: Fable Papercraft [message #44161 is a reply to message #43944] Mon, 21 July 2008 20:37 Go to previous messageGo to next message
NightmareMaker is currently offline  NightmareMaker
Messages: 100
Registered: July 2007
Location: Sao Paulo, Brazil.
I'm really impressed. This looks awesome.
Can anyone post a picture of any of the items mounted? It looks so cool *-*

Keep up the work, I hope to see more of those.

Thanks Very Happy

http://img264.imageshack.us/img264/8827/signfighter8559026437ia.gif
*click to see my gallery* (or else die painfully)

Report message to a moderator

Re: Fable Papercraft [message #44240 is a reply to message #43944] Fri, 25 July 2008 07:17 Go to previous messageGo to next message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
@NM

thanks Smile

sorry - on hols atm - post in a few days

nearly outa computer time - 1 min left Shocked

laters,
Vahron

Report message to a moderator

Re: Fable Papercraft [message #44500 is a reply to message #43944] Wed, 06 August 2008 12:42 Go to previous message
vahron is currently offline  vahron
Messages: 16
Registered: August 2007
Location: UK
Bandit Barrel
http://img510.imageshack.us/img510/9916/banditbarrelmodelvg5.th.png

I'm back and here's a new model Smile

I'll attempt to get some pic's up of some of the models I've assembled later.

Can't guarantee there'll be that many new things over the next few days - got tons to do Razz

edit:
http://img169.imageshack.us/img169/504/fableobjectspy8.th.png

Terrible pic quality Embarassed but should give a rough idea as to how some of the items look finished.

[Updated on: Wed, 06 August 2008 15:01]

Report message to a moderator

Previous Topic: help!!!!!!!!
Next Topic: i knowthis is bad but how do you get into the bs cellar
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Feb 08 04:07:12 PST 2025

Total time taken to generate the page: 0.08728 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.
Copyright ©2001-2018 FUDforum Bulletin Board Software