Fable: The Lost Chapters Mod Scene
Fast Uncompromising Discussions. FUDforum will get your users talking.

Home » Fable TLC » Discussion » Tutorials » [General] Camera Changing Tutorial  () 2 Votes
[General] Camera Changing Tutorial [message #55383] Sat, 26 December 2009 01:59 Go to next message
OldBoy is currently offline  OldBoy
Messages: 1112
Registered: October 2005
Location: Groningen

Administrator

Marcopolo wrote on Wed, 03 October 2007 13:11

ok so this tutorial is how to make it so you can make your camera zoom to unreasonable distances or so it can zoom closer than it already does.






1. open fable explorer

2. click on the CAMERA_MANAGER_SET + sign

3. open camera manager set default

4. through the above open CAMERA_MANAGER_MAIN

5. then open CAMERA_PC_FAR

6. scroll down until you see dolly length

7. change it to your desired number, in the picture it is set to 250

8. save mods and run fable




tip: another fun thing to do is in the same thing CAMERA_PC_FAR, you can change the field of view (labeled fov) it is set to 90 as default but setting it to 120 gives a crazy fisheye effect.




have fun Smile


MODERATOR'S NOTE:
There another way to do this.
Perhaps the way to go depends on the defxml you have, or maybe a mistake was made in the first part of the tutorial, I don't know. I tried both tutorials and this second one worked for me while the first did not. Thanks Sativarg.
Sativarg wrote on Mon, 30 April 2012 14:59

Rolling Eyes


Here is my proposal for an amended tutorial
  1. open fable explorer
  2. Unfold CAMERA_MODE (click "+" sign)
  3. Double click CAMERA_PC_FAR to open it
  4. in the new window labeled CAMERA_PC_FAR unfold CAMERA_MODE
  5. scroll down until you see "DollyLength"
  6. Important: Note the value to the right and remember it
  7. change it to your desired number,
    • in the picture it is set to 250
    • default should be close to 5
  8. save mods and run fable

============================================



[Updated on: Mon, 30 April 2012 18:31] by Moderator

Report message to a moderator

Re: [General] Camera Changing Tutorial [message #57584 is a reply to message #55383] Wed, 09 June 2010 12:43 Go to previous messageGo to next message
atlos123 is currently offline  atlos123
Messages: 16
Registered: June 2010
Location: U.S.,N.Y.
I can't find dolly length. I'm on CAMERA_PC_FAR, and I see the Cage Radius, FOV, and roll angle, but everything else is labeled "unknown".
Re: [General] Camera Changing Tutorial [message #57585 is a reply to message #57584] Wed, 09 June 2010 12:54 Go to previous message
JohnDoe is currently offline  JohnDoe
Messages: 3007
Registered: October 2007

Retired
  1. Perhaps you're not looking hard enough or going too fast, take your time and check again;
  2. Perhaps you're looking in the wrong area, make sure to follow the steps exactly; or,
  3. Perhaps you have an outdated def.xml, pick up the latest one in the FE thread.
Previous Topic: [Object] Change the CAppearanceModifierDef
Next Topic: [Hero] Remove Old age effects
Goto Forum:
  


Current Time: Thu Mar 28 03:20:44 PDT 2024

Total time taken to generate the page: 0.00973 seconds